Discover the Benefits & Features of NORAC Height Control

• Ultrasonic sensor hardware and software is designed by NORAC specifically for sprayer boom height control applications.
• Ultrasonic signals can distinguish the difference between the ground and standing crop or field residue.
• Boom height is controlled by choosing Soil Mode™ or Crop Mode™ which senses the soil surface or the top of the crop.

• The NORAC system allows for effective control of the boom without altering the boom from its original design.
• The patented Roll Control™ technology allows the NORAC system to monitor and compensate for boom center section roll.
• The addition of Active Roll Control™ to the NORAC Spray Height Control system enables the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift.
• Spray height is maintained, even in the most severe conditions.
• Rotating and controlling the center section also increases the wing lift speed.

• Automatically maintains a preset tip height above the ground or crop (Soil Mode™ / Crop Mode™).
• Shows the height that the nozzles tips are from either the top of the crop or the soil.
• Quick and easy to use with NORAC's automated setup and user-friendly interface.

• Rugged aluminum sensors are designed for trouble free use.
• Internal electronics are epoxy sealed making them virtually impervious to moisture damage.
• The sensor senses changes in height to the nearest half inch.
• Break-away brackets have been designed to provide superior protection to the sensors. The spring loaded mounting bracket will bend back approximately 90 degrees.
• Sensors are able to distinguish four different targets simultaneously including differentiating ground surface from standing crop or field residue.

• The addition of Active Roll Control™ to the NORAC Spray Height Control system enables the sprayer to go over severe terrain by rolling the center section, as well as controlling wing lift.
• Spray height is maintained, even in the most severe conditions.
• Rotating and controlling the center section also increases the wing lift speed.

• A separate NORAC designed proportional valve is used for each wing to ensure smooth independent hydraulic control.
• Automatic oil temperature monitoring and compensation for superior performance.
• Load sensing and closed center models are available.

NORAC brings you Hybrid Mode™, the advanced crop sensing feature for in-crop spraying. Hybrid Mode™ eliminates the need for the operator to take manual control of the boom while spraying in row crops or adverse situations such as lodged, thin and uneven crop. Only NORAC provides the boom stability and spray height accuracy you can trust in all field conditions. Guaranteed.

Hybrid Mode™ In-Crop Benefits:

• Increases the amount of time that the boom is within the target spray height, reducing drift and promoting efficient application of chemicals and fertilizers
• Controls the boom at a rate that is faster than an operator could control it
• Takes over situations in which the operator would have to take manual control over boom functions
• Increased boom stability in Automatic Mode reduces boom height error

For more information on NORAC's Hybrid Mode™ click the link below:
NORAC Hybrid Mode™